RELOADING SYSTEMS

Discover our broad range of loading and unloading products, such as doors, dock levellers, sealing systems, and optional accessories. Manufactured using the highest quality materials and advanced technologies, our products meet all the security, safety, and operation standards.

WISNIOWSKI LOADING DOCKS – a whole new quality

RH12B dock leveller – new product!

The dock leveller compensates for the height difference between the dock and the cargo floor.

The RH12B dock leveller is an electrohydraulic dock leveller with a swing lip. The installation of the dock leveller and the preparation of the dock pit are very simple, as this model features a self-supporting design. The dock dimensions and the installation method were designed so as to enable its installation in standard prefabricated dock pits with an undercut to accommodate the tail lift.

DOCK SEALS

Dock seals supplied by WISNIOWSKI are great solutions, which provide durability and good operational properties. They make it possible to limit energy consumption and ensure protection for unloaded and loaded goods, while at the same time providing comfortable working conditions for the personnel.

Thanks to the use of durable materials, they are highly resistant to UV radiation, as well as high and low temperatures. They retain a lasting appealing look and individual elements are not prone to deformation.

We offer dock seals in different versions adapted to the type of vehicle, unloaded and reloaded goods, and storage methods.

WHEEL GUIDES

Safe and accurate docking of a lorry in the loading dock is possible thanks to the use of wheel guides.

The wheel guides enable the vehicle to park accurately without the risk of damaging the loading dock, the building or the vehicle

BUMPERS

Provide additional protection to prevent loading dock and vehicle damage. They absorb the force and impact of the lorry trailer backing up to the loading dock.

INFORMATION

RH12B electrohydraulic dock leveller with a swing lip

pomost Inkema wisniowski

Design

The 2,000×2,560 [mm] RH12B is an electrohydraulic dock leveller with a swing lip. The installation of the dock leveller and the preparation of the dock pit are very simple, as this model features a self-supporting design. The dock dimensions and the installation method were designed so as to enable its installation in standard prefabricated dock pits with an undercut to accommodate the tail lift. The installation width of the dock pit for installing the dock leveller is 2,060-2,085 [mm]. The deck is moved with two hydraulic actuators (the swing lip is moved by a separate actuator). The deck is made of sheet 8 [mm] thick, swing lip 15 [mm] thick, grade S235JR. The dock leveller is provided with longitudinal and lateral reinforcement made of high-strength, grade S355NL steel. The rear part of the deck is attached with three hinges.

 

Operation

The dock leveller is operated with a single button. When the button is pressed, the deck is lifted from the home position and the lip is extended when the highest position is reached. When the button is released, the deck is automatically lowered until the swing lip rests on the vehicle cargo floor.

Safety features

  • fully hydraulic “emergency stop” which uses a safety valve to block the hoses in case of rupture,
  • emergency switch with switch-on interlock,
  • side foot guard plates,
  • lip hold on the front beam in the home position (for reinforcement during lateral movement),
  • yellow and black warning stripes,
  • robust service support beam,
  • thermal relay motor protection.

Technical specification

Capacity (EN 1398)60 kN
Installation height600 [mm]
Lip length400 [mm]
Lip angle (from the end face)(ca. 5O) 150 [mm]
Motor0,75 kW
Diameter of main actuator piston rods (2 pcs.)35 [mm]
Diameter of the lip actuator piston rod30 [mm]
Ambient temperature operating rangefrom -30OC to +40OC