Profiles Z - construction profiles

Product description

Profiles Z

Cold -headed construction profiles of the Z, C and σ type are made of cold -plated steel.

The large variety of strength parameters of the sections allows you to optimally select the amount of material needed.

Color –

Metallic coatings

Technical Specifications

General Information

Production profile

Opening sections

Types and arrangement of holes

General Information

Production profile

Z PROFILE	sheet thickness	Libra	H	N/A	Gd	C
	mm	kg/m	mm	mm	mm	mm
Of 100	1.50	2.64	100	48	53	16
	2.00	3.52	100	48	53	16
	2.50	4.40	100	48	55	16
	3.00	5.28	100	48	55	16
	3.50*	6.16	100	47	56	16

Of 100	1.50	3.00	100	60	68	16
	2.00	4.00	100	60	68	16
	2.50	5.00	100	60	68	16
	3.00	6.00	100	60	68	16
	3.50*	7.00	100	60	56	16

Of 150	1.50	3.24	150	48	53	21
	2.00	4.32	150	48	53	21
	2.50	5.40	150	48	55	21
	3.00	6.48	150	48	55	21
	3.50*	7.56	100	47	56	21

Of 150	1.50	3.60	150	60	68	21
	2.00	4.80	150	60	68	21
	2.50	6.00	150	60	68	21
	3.00	7.20	150	60	68	21
	3.50*	8.40	150	60	68	21

From 180	1.50	3.96	180	60	68	21
	2.00	5.28	180	60	68	21
	2.50	6.60	180	60	68	21
	3.00	7.92	180	60	68	21
	3.50*	9.24	100	60	56	21

Of 200	1.50	3.84	200	48	53	21
	2.00	5.12	200	48	53	21
	2.50	6.40	200	48	55	21
	3.00	7.68	200	48	55	21
	3.50*	9.96	200	47	56	21

Of 200	1.50	4.20	200	60	68	21
	2.00	5.60	200	60	68	21
	2.50	7.00	200	60	68	21
	3.00	8.40	200	60	68	21
	3.50*	9.80	200	60	68	21

Of 250	1.50	4.80	250	60	68	21
	2.00	6.40	250	60	68	21
	2.50	8.00	250	60	68	21
	3.00	9.60	250	60	68	21
	3.50*	11.20	250	60	68	21

Of 250	1.50	4.97	250	65	75	21
	2.00	6.62	250	65	75	21
	2.50	8.24	250	65	75	21
	3.00	9.89	250	65	75	21
	3.50*	11.54	250	65	75	21

Of 300	1.50	5.69	300	65	75	21
	2.00	7.58	300	65	75	21
	2.50	9.32	300	65	75	21
	3.00	11.18	300	65	75	21
	3.50*	13/04	300	65	75	21

Of 350	1.50	6.24	350	65	75	21
	2.00	8.32	350	65	75	21
	2.50	10.40	350	65	75	21
	3.00	12.48	350	65	75	21
	3.50*	14.56	350	65	75	21

Of 400	1.50	6.79	400	65	75	21
	2.00	9.06	400	65	75	21
	2.50	11.32	400	65	75	21
	3.00	14,16	400	65	75	21
	3.50*	15.84	400	65	75	21

Of 350	1.50	6.48	350	75	85	21
	2.00	8.64	350	75	85	21
	2.50	10.80	350	75	85	21
	3.00	12.96	350	75	85	21
	3.50*	15.20	350	75	85	21

Of 400	1.50	6.79	400	75	85	21
	2.00	9.06	400	75	85	21
	2.50	11.32	400	75	85	21
	3.00	14,16	400	75	85	21
	3.50*	16.52	400	75	85	21

Opening sections

“Z” and “C” profiles enable quick and easy development of industrial or service halls. They are connected mainly with screws. For this purpose, three types of holes are provided in the profiles (table 1):

Table 1.

Round holes (diameter – Ø in mm)	Bean holes (length x width – in mm)
AT 10 O’CLOCK	14 x 18
AT 12	14 x 25
AT 14	19 x 25
Ø 16
AT 18
Ø 22

Depending on the type of profile used, there are different values for the spacing of technical and assembly holes. Their values are given in the table below.
The drawing shows the possibilities of longitudinal drilling.
Opening is possible in all planes of the section.

E – dimension from the wide shelf Bg (for Z-type profiles)

Hole arrangement

J – 32 mm
W – 100 mm
I – 50 mm

Z profile	sheet thickness	E	F
	mm	mm	mm
Of 100	1.5	25.8	50
	2	26	50
	2.5	26.3	50
	3	26.5	50

Of 150	1.5	50.8	50
	2	51	50
	2.5	51.3	50
	3	51.5	50

From 180	1.5	50.8	80
	2	51	80
	2.5	51.3	80
	3	51.5	80

Of 200	1.5	50.8	100
	2	51	100
	2.5	51.3	100
	3	51.5	100

Of 250	1.5	50.8	150
	2	51	150
	2.5	51.3	150
	3	51.5	150

Of 280	1.5	50.8	180
	2	51	180
	2.5	51.3	180
	3	51.5	180

Of 300	1.5	50.8	200
	2	51	200
	2.5	51.3	200
	3	51.5	200

Of 350	1.5	50.8	250
	2	51	250
	2.5	51.3	250
	3	51.5	250

Of 400	1.5	50.8	300
	2	51	300
	2.5	51.3	300
	3	51.5	300

Types and arrangement of holes

Profiles Z - construction profiles

Product description

Profiles Z

Color –

Technical Specifications

Technical informations

EMAIL

TELEPHONE

ADDRESS

NAME

EMAIL

PHONE